Skylight / November 15, 2018 / Odo Vaillancour.
Solar heat control glazing - Manufacturers use various glazing methods to reduce the impact of summer time solar heat gains and winter time heat losses. These come in the form of heat-absorbing tints double and tripled paned skylights and low-emissivity coatings. Slope When your window professional installs your skylight one of the factors they will take into consideration is the slope. The slope or tilt of the skylight affects the amount of solar heat gain. A low slope on your skylight admits more solar heat in the summer and less in the winter which is the opposite of the effect you are trying to achieve As a rule of thumb you want to achieve a slope equal to your geographical latitude plus 5 to 15 degrees.
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.
If installed badly however they can do a great deal of damage. Many people dont realize how easily that damage can be avoided by purchasing a replacement skylight instead of giving it up altogether. A skylight might be detrimental to a house in many different ways. They require flashing when installed and without proper flashing of aluminum or some other sturdy material the light will leak. Rain and other forms of moist weather will find its way into the house itself. Roof design is very important when choosing and installing a skylight. It is another reason why skylights fail after awhile. The angle or tilt of a roof and the angle at which the skylight is set will determine how strong and supported the light is.
It is recommended that the skylight size should never be more than five percent of the floor area in rooms with many windows and not more than fifteen percent of the rooms total floor area for spaces with very few windows. Skylights on north-facing roofs provide cool illumination while east-facing roofs provide maximum light and heat in the morning. West-facing skylights provide afternoon sunlight and heat. South-facing skylights provide more passive solar heat than any other location. Skylights are an excellent way to bring more natural light into your home. Just one skylight can dramatically transform your room by adding 30% more natural light than a window. This helps you save energy and makes your home warmer during the winter.