Skylight / July 14, 2018 / Onfroi Berger
Solar heat control glazing - Manufacturers use various glazing methods to reduce the impact of summer time solar heat gains and winter time heat losses. These come in the form of heat-absorbing tints double and tripled paned skylights and low-emissivity coatings. Slope When your window professional installs your skylight one of the factors they will take into consideration is the slope. The slope or tilt of the skylight affects the amount of solar heat gain. A low slope on your skylight admits more solar heat in the summer and less in the winter which is the opposite of the effect you are trying to achieve As a rule of thumb you want to achieve a slope equal to your geographical latitude plus 5 to 15 degrees.
If the room you intend to illuminate with the skylight has an open ceiling with no attic space above you can install the skylight without needing to construct a light shaft. This is by far the simplest installation and it offers the maximum amount of light and a view of the sky. For ceilings with an attic space above a light shaft must be constructed that connects the skylight to the room. Skylight shafts take one of three forms: Straight in which the shaft drops vertically from the roof to the ceiling and is the same dimension as the skylight itself. This type is the easiest to construct but because of its offset angle relative to the skylight offers the least amount of light.
Before installing a skylight in your home you need to carefully evaluate what type of skylight will work best for you considering your specific requirements and how to install it in a way that it improves your homes energy efficiency. Its a sensible idea to evaluate the energy performance ratings of skylights based on the climate that you live in and the architectural design of your home. In the U.S. you can find labeled energy-efficient skylights which tell you the minimum energy performance rating criteria by climate. The physical dimensions of the skylight also greatly affect the lux level and temperature of the space it is being used for.