Skylight / July 14, 2018 / Onfroi Berger
If the room you intend to illuminate with the skylight has an open ceiling with no attic space above you can install the skylight without needing to construct a light shaft. This is by far the simplest installation and it offers the maximum amount of light and a view of the sky. For ceilings with an attic space above a light shaft must be constructed that connects the skylight to the room. Skylight shafts take one of three forms: Straight in which the shaft drops vertically from the roof to the ceiling and is the same dimension as the skylight itself. This type is the easiest to construct but because of its offset angle relative to the skylight offers the least amount of light.
Obviously skylights provide added day lighting and they may even offer ventilation. However heat gain and loss is also a consideration you should make. Many modern skylights feature sun tracking lenses or mirrored surfaces that provide light without heat loss or gain. Moreover whether a fixed skylight or similar alternative is better than a ventilated skylight is a question youll want to answer. Remember ventilating can help with temperature control but it is also important for preventing the buildup of moisture. Take some time to speak to your skylight or roofing professional so that you can be sure to choose the right skylight.
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.