Skylight / July 8, 2018 / Baptiste Allain
This heat gain can be minimized by installing your south-facing skylight in the shade of deciduous trees or adding a moving window covering. Skylights come in all shapes and sizes. Its size greatly affects the illumination level and temperature of the space below. As a rule of thumb the size of a skylight should never be more than 5% of the floor area in rooms with many windows; and no more than 15% of the rooms total floor area for spaces with few windows. Dept. of Energy. Glazing Like windows skylight manufacturers use different types of glazing to improve their energy efficiency. The glazing comes in three different forms. Plastic glazing - This type of glazing is usually inexpensive and less likely to break than other glazing materials.
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.
It will also make all the difference for a skylight that doesnt have newer methods for moving condensation away from the window. It is possible that some skylights are suffering manufacturer related defects. Most worthy manufacturers of skylights or replacements will guarantee their product. A new and complete skylight will be sent and installed hopefully at no cost. It will require the same installation techniques as applied with the first but will obviously be better all around. It is often only when installing a replacement skylight that the damage caused by the original is noticed. The moisture damage caused to a roof is often hidden by the shingles and failed flashing around a skylight.