Skylight / July 12, 2018 / Odo Vaillancour
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.
Roof skylights bring in natural sunlight into your house and add to the style of your house. But those who install it are always worried about one problem and that is a leaking roof skylight. It cant be denied that there is increased risk of a leak but if you install and seal your skylight properly you can make your skylight absolutely leak proof and secure. Skylights have a reputation that they always leak. But it is not so. You must not let this rumor stop you from installing a roof skylight that you have always wanted. There has been great progress in technology and techniques used in installing a roof skylight and if the skylight is installed properly there is hardly any chance of it developing a leak.
The shape of the skylights installed in your home will impact the design and look of the room. In the past skylights were prone to vapor build-up during the cold season. This vapor would then trickle down as water droplets into the room. However these days it is possible to buy skylights with channels that collect water vapor. More expensive skylights are less vulnerable to condensation related problems. Material: The kind of material used on skylights at home has a direct impact on their look and efficiency. Glass and plastic are the most popular materials used for glazing the skylights. Plastic skylights are less expensive and do not break easily. However plastic glazing may become discolored over time and may even have scratches. Glass on the other hand is scratch proof and does not fade. But it is more expensive and is usually found in commercial structures.