Skylight / July 12, 2018 / Odo Vaillancour
This heat gain can be minimized by installing your south-facing skylight in the shade of deciduous trees or adding a moving window covering. Skylights come in all shapes and sizes. Its size greatly affects the illumination level and temperature of the space below. As a rule of thumb the size of a skylight should never be more than 5% of the floor area in rooms with many windows; and no more than 15% of the rooms total floor area for spaces with few windows. Dept. of Energy. Glazing Like windows skylight manufacturers use different types of glazing to improve their energy efficiency. The glazing comes in three different forms. Plastic glazing - This type of glazing is usually inexpensive and less likely to break than other glazing materials.
To maximize the energy efficiency of skylight windows you must choose the material carefully. Both glass and plastic skylights have their unique benefits and disadvantages. Glass is more durable but there are limitations in shape. It is also quite expensive. On the other hand plastic is flexible and can easily be bent or stretched to different shapes. It is inexpensive too. But plastic glazing has a tendency to change color after a while. More importantly irregular shapes lead to more heat loss as larger surface areas are exposed. Windows VS Skylights: It is wrong to believe that skylights can replace or take the place of windows.
However these surfaces scratch easily and can become brittle and discolored. Glass glazing - This is found in the more expensive skylights. It is more durable than plastic and does not discolor. All glass used for skylights must be made of "safety glazing" a generic term for both tempered and laminated glass. Tempered glass is the most impact resistant. Laminated glass is fabricated with a thin layer of plastic embedded near the center of the glass. Both types keep the glass from breaking into large sharp pieces. Skylights are often made with a tempered glass on the exterior side and a laminated pane on the interior side. This arrangement gives maximum impact resistance while protecting occupants from falling shards of glass.