Skylight / July 9, 2018 / Delphine Demers
The shape of the skylights installed in your home will impact the design and look of the room. In the past skylights were prone to vapor build-up during the cold season. This vapor would then trickle down as water droplets into the room. However these days it is possible to buy skylights with channels that collect water vapor. More expensive skylights are less vulnerable to condensation related problems. Material: The kind of material used on skylights at home has a direct impact on their look and efficiency. Glass and plastic are the most popular materials used for glazing the skylights. Plastic skylights are less expensive and do not break easily. However plastic glazing may become discolored over time and may even have scratches. Glass on the other hand is scratch proof and does not fade. But it is more expensive and is usually found in commercial structures.
Skylights are one of the quickest and easiest ways to make any room of your home lighter and brighter adding an open and airy feeling. Ventilating skylights are excellent for kitchens or bathrooms. In addition to providing extra light they also open. This overhead ventilation creates an updraft. Ventilated skylights can be operated by several means: Controlled by temperature sensor Remote control Electric on/off wall switch Manual or motorized hand crank. Fixed skylights are for additional light only. Theyre great for attics bonus rooms or anywhere you want extra illumination without entrance or exhaustion of air. Styles and sizes vary from domes to rectangles.
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.