Skylight / July 9, 2018 / Delphine Demers
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.
When these are pulled away and removed the drenched and water damaged roof beams come into view. Moisture comes from both inside and outside. Weather isnt the only thing that causes skylights to leak. Warm air from inside the house can catch in the skylight as it rises on warm air and then drips down onto furniture and valuables below. Modern skylight replacements can come with what is called low-e glass. This low emissivity glass keeps energy meant to heat or cool a room in and helps to reflect heat and cold out and away from the light itself. This is usually done through a special film that the glass is coated with. This film can block out UV rays and comes in many different filtering shades.
Solar heat control glazing - Manufacturers use various glazing methods to reduce the impact of summer time solar heat gains and winter time heat losses. These come in the form of heat-absorbing tints double and tripled paned skylights and low-emissivity coatings. Slope When your window professional installs your skylight one of the factors they will take into consideration is the slope. The slope or tilt of the skylight affects the amount of solar heat gain. A low slope on your skylight admits more solar heat in the summer and less in the winter which is the opposite of the effect you are trying to achieve As a rule of thumb you want to achieve a slope equal to your geographical latitude plus 5 to 15 degrees.