Skylight / July 14, 2018 / Onfroi Berger
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.
This means more heat is going to find its way into the room at the most inopportune times of the day. The problem can be rectified by careful selection of skylights. Skylights in the home are the easiest least expensive and most effective way of sprucing up your home and giving it a makeover. The reason why skylights are becoming immensely popular is the way they encompass a slice of the sky within the home. They can thus impart roominess to any room. But to get maximum impact from skylights in the home it is important to understand the design positioning and size of skylights. Size: As a rule specialists believe that skylights illuminate a room that is roughly 20 times the size of the room.
Obviously skylights provide added day lighting and they may even offer ventilation. However heat gain and loss is also a consideration you should make. Many modern skylights feature sun tracking lenses or mirrored surfaces that provide light without heat loss or gain. Moreover whether a fixed skylight or similar alternative is better than a ventilated skylight is a question youll want to answer. Remember ventilating can help with temperature control but it is also important for preventing the buildup of moisture. Take some time to speak to your skylight or roofing professional so that you can be sure to choose the right skylight.