Skylight / July 12, 2018 / Odo Vaillancour
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.
For one thing skylights are positioned in such a way that they are inaccessible unless they are operated by remote. Even in cases of motorized skylights which are easily manipulated there are still some disadvantages that are inherent to skylights that are not present or minimized in windows. Vertical windows lose less heat by convection when compared to skylights. Also since windows are generally protected by overhangs or shrubs they lose less heat by radiation. On the other hand skylights are directly exposed to the sky. Thus they lose more heat by radiation. Proper insulation can reduce this heat loss to a large extent. In the summer season skylights are more exposed to the direct heat of the sun than windows.
Your ventilating skylight can be operated by one of three ways: Manual skylight controls - These are opened by your use of an extended rod to manually crank the skylight open. These are designed for ceilings of less than 15 feet. Electronic skylight controls - A simpler model of this type of control is wired to a wall mounted switch which opens and closes the skylight. More complex models are controlled by a special wall console of a wireless remote control. Automatic operating controls - With this type of control integrated heat sensors trigger the skylight to open when the interior heat reaches a preset temperature. Exterior sensors automatically close the unit when they sense moisture.