Skylight / July 8, 2018 / Baptiste Allain
The structure of the house is another deciding factor. If there are beams pillars or pipes in the way the skylight on the roof may not get the right amount of visibility. Making structural changes is not an affordable option in most cases. So it is better to evaluate the room before you place skylights on the roof. In most cases skylights should be built into the house at the time of drawing the design of the house. In case skylights are introduced at a later point of time care must be taken to ensure that they are placed correctly and installed properly. Skylights are overhead windows often in a roof that allow sunlight to filter inside any enclosed area; they are a great natural light option to artificial lighting solutions during the daytime.
Some people in an effort to let in plenty of light choose the biggest skylight they can afford. But bigger is not always better when it comes to choosing skylights for your home. The size of the skylight should not be more than 5% of the floor space if there are other windows in the room. It should be less than 15% of the floor space if there are few windows in the room. Unlike commercial buildings where structures are huge there is only so much that a room within the house can take. So choose skylights that suit the size of the room. Style: Although most skylights are rectangular these are available in a variety of sizes shapes and colors.
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.