Skylight / July 8, 2018 / Baptiste Allain
Since most skylights are meant to be installed on a roof with asphalt shingles you may need to pay extra for flashing if you have tile or metal roofing. When you think of skylight design you may think that only refers to the visible shape of the panel chosen; in fact there are many aspects to skylights that relate to the design and affect the usefulness of the skylight. Some skylights need to provide light for a large area while others have a different purpose. Learn all you can about skylights and skylight design as a consumer before you consult a professional. This will help you to understand better the decisions you will have to make. Skylights are beneficial to have in your home for many reasons.
It will also make all the difference for a skylight that doesnt have newer methods for moving condensation away from the window. It is possible that some skylights are suffering manufacturer related defects. Most worthy manufacturers of skylights or replacements will guarantee their product. A new and complete skylight will be sent and installed hopefully at no cost. It will require the same installation techniques as applied with the first but will obviously be better all around. It is often only when installing a replacement skylight that the damage caused by the original is noticed. The moisture damage caused to a roof is often hidden by the shingles and failed flashing around a skylight.
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.