Roof Windows / August 3, 2018 / Onfroi Berger
A skylight is like a window which has been placed in your roof. It has a frame specially designed to withstand rain and prevent leakage from rain and snow. To maximize a skylights use of natural light to illuminate a room or its passive solar heating potential you will want to take into consideration how a skylight is positioned. Facing north your skylight will provide fairly constant illumination but will not provide a lot of heat. Facing east it will provide the maximum amount of light and solar heat gain in the morning. Facing west your skylight provides afternoon sunlight as well as heat gain. A skylight facing south provides the greatest potential for winter passive solar heat gain than any other location but will often allow unwanted heat gain in the summer.
However these surfaces scratch easily and can become brittle and discolored. Glass glazing - This is found in the more expensive skylights. It is more durable than plastic and does not discolor. All glass used for skylights must be made of "safety glazing" a generic term for both tempered and laminated glass. Tempered glass is the most impact resistant. Laminated glass is fabricated with a thin layer of plastic embedded near the center of the glass. Both types keep the glass from breaking into large sharp pieces. Skylights are often made with a tempered glass on the exterior side and a laminated pane on the interior side. This arrangement gives maximum impact resistance while protecting occupants from falling shards of glass.
Your ventilating skylight can be operated by one of three ways: Manual skylight controls - These are opened by your use of an extended rod to manually crank the skylight open. These are designed for ceilings of less than 15 feet. Electronic skylight controls - A simpler model of this type of control is wired to a wall mounted switch which opens and closes the skylight. More complex models are controlled by a special wall console of a wireless remote control. Automatic operating controls - With this type of control integrated heat sensors trigger the skylight to open when the interior heat reaches a preset temperature. Exterior sensors automatically close the unit when they sense moisture.