Skylight / July 10, 2018 / Faye Savoie
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.
Before installing a skylight in your home you need to carefully evaluate what type of skylight will work best for you considering your specific requirements and how to install it in a way that it improves your homes energy efficiency. Its a sensible idea to evaluate the energy performance ratings of skylights based on the climate that you live in and the architectural design of your home. In the U.S. you can find labeled energy-efficient skylights which tell you the minimum energy performance rating criteria by climate. The physical dimensions of the skylight also greatly affect the lux level and temperature of the space it is being used for.
Solar heat control glazing - Manufacturers use various glazing methods to reduce the impact of summer time solar heat gains and winter time heat losses. These come in the form of heat-absorbing tints double and tripled paned skylights and low-emissivity coatings. Slope When your window professional installs your skylight one of the factors they will take into consideration is the slope. The slope or tilt of the skylight affects the amount of solar heat gain. A low slope on your skylight admits more solar heat in the summer and less in the winter which is the opposite of the effect you are trying to achieve As a rule of thumb you want to achieve a slope equal to your geographical latitude plus 5 to 15 degrees.