Skylight / July 11, 2018 / Nicolas Charlebois
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.
Obviously skylights provide added day lighting and they may even offer ventilation. However heat gain and loss is also a consideration you should make. Many modern skylights feature sun tracking lenses or mirrored surfaces that provide light without heat loss or gain. Moreover whether a fixed skylight or similar alternative is better than a ventilated skylight is a question youll want to answer. Remember ventilating can help with temperature control but it is also important for preventing the buildup of moisture. Take some time to speak to your skylight or roofing professional so that you can be sure to choose the right skylight.
This is ideal for cubicles or small offices even restrooms. The places where tubular skylights are most effective are in the bottom floor of a multi-story building in order to light the space with natural sunlight warehouses private offices or to prevent heat loss and for solar gain. The installation of tubular skylights requires a professional installer who can work with the thickness of your ceiling and angles to get the most out of your skylight. The top panel of the skylight will be affixed to your roof with the channel running through the ceiling completely hidden from sight with the bottom window attached on the visible area of the ceiling.