Skylight / November 15, 2018 / Odo Vaillancour.
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.
If installed badly however they can do a great deal of damage. Many people dont realize how easily that damage can be avoided by purchasing a replacement skylight instead of giving it up altogether. A skylight might be detrimental to a house in many different ways. They require flashing when installed and without proper flashing of aluminum or some other sturdy material the light will leak. Rain and other forms of moist weather will find its way into the house itself. Roof design is very important when choosing and installing a skylight. It is another reason why skylights fail after awhile. The angle or tilt of a roof and the angle at which the skylight is set will determine how strong and supported the light is.
Glass and acrylic or plastic skylights are available. Tubular skylights are relatively new on the scene. The small size allows them it to be used in spaces where full-sized skylights cannot. Hallways bathrooms even closets can accommodate a tubular skylight. They provide a lot of light in spite of their small size. The concept and installation process are basically the same as for a regular skylight except they have an enclosed tunnel of reflective material to reflect the light. They are available in many sizes. The small ones are 10 to 12 inch diameter and the large ones are 24 inches. Flat glass skylights come mounted in a wood or integrated rubber and metal framework and require no additional curb construction.
This is ideal for cubicles or small offices even restrooms. The places where tubular skylights are most effective are in the bottom floor of a multi-story building in order to light the space with natural sunlight warehouses private offices or to prevent heat loss and for solar gain. The installation of tubular skylights requires a professional installer who can work with the thickness of your ceiling and angles to get the most out of your skylight. The top panel of the skylight will be affixed to your roof with the channel running through the ceiling completely hidden from sight with the bottom window attached on the visible area of the ceiling.