Skylight / July 12, 2018 / Odo Vaillancour
Solar heat control glazing - Manufacturers use various glazing methods to reduce the impact of summer time solar heat gains and winter time heat losses. These come in the form of heat-absorbing tints double and tripled paned skylights and low-emissivity coatings. Slope When your window professional installs your skylight one of the factors they will take into consideration is the slope. The slope or tilt of the skylight affects the amount of solar heat gain. A low slope on your skylight admits more solar heat in the summer and less in the winter which is the opposite of the effect you are trying to achieve As a rule of thumb you want to achieve a slope equal to your geographical latitude plus 5 to 15 degrees.
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.
Glass and acrylic or plastic skylights are available. Tubular skylights are relatively new on the scene. The small size allows them it to be used in spaces where full-sized skylights cannot. Hallways bathrooms even closets can accommodate a tubular skylight. They provide a lot of light in spite of their small size. The concept and installation process are basically the same as for a regular skylight except they have an enclosed tunnel of reflective material to reflect the light. They are available in many sizes. The small ones are 10 to 12 inch diameter and the large ones are 24 inches. Flat glass skylights come mounted in a wood or integrated rubber and metal framework and require no additional curb construction.