Skylight / July 12, 2018 / Odo Vaillancour
This is ideal for cubicles or small offices even restrooms. The places where tubular skylights are most effective are in the bottom floor of a multi-story building in order to light the space with natural sunlight warehouses private offices or to prevent heat loss and for solar gain. The installation of tubular skylights requires a professional installer who can work with the thickness of your ceiling and angles to get the most out of your skylight. The top panel of the skylight will be affixed to your roof with the channel running through the ceiling completely hidden from sight with the bottom window attached on the visible area of the ceiling.
The air near the ceiling is automatically cooled when fresh air flows in from outside. These roof skylights are so designed that they open and close a little to let in the fresh air. The glass tilts at about 45 degrees. There is a small handle to manually open the venting roof skylight. You crank the handle slightly to open or close or adjust the angle and position of the glass. The venting roof skylights are located in the ceiling of the house and are hard to reach so there is an extension to the handle. Otherwise every time you want to open or shut the venting roof skylight you will need a ladder or a high stool. Nowadays electronically operated venting skylights are also becoming very popular.
Your ventilating skylight can be operated by one of three ways: Manual skylight controls - These are opened by your use of an extended rod to manually crank the skylight open. These are designed for ceilings of less than 15 feet. Electronic skylight controls - A simpler model of this type of control is wired to a wall mounted switch which opens and closes the skylight. More complex models are controlled by a special wall console of a wireless remote control. Automatic operating controls - With this type of control integrated heat sensors trigger the skylight to open when the interior heat reaches a preset temperature. Exterior sensors automatically close the unit when they sense moisture.