Skylight / July 12, 2018 / Odo Vaillancour
Skylights may seem inexpensive at first glance since a quality 2x4 foot skylight along with a flashing kit costs anywhere from $100 to $400. However you need to consider adding another $3000 for installation costs. That being said you first need to carefully evaluate if installing a skylight is the right thing for your home. Till recently having a roof slope determined if you could install a skylight. Flat roofs or those which were too steep required special tools and techniques. However many of the skylight kits available today include a comprehensive installation kit and procedures which permits it to be installed on all types of roofs.
However these surfaces scratch easily and can become brittle and discolored. Glass glazing - This is found in the more expensive skylights. It is more durable than plastic and does not discolor. All glass used for skylights must be made of "safety glazing" a generic term for both tempered and laminated glass. Tempered glass is the most impact resistant. Laminated glass is fabricated with a thin layer of plastic embedded near the center of the glass. Both types keep the glass from breaking into large sharp pieces. Skylights are often made with a tempered glass on the exterior side and a laminated pane on the interior side. This arrangement gives maximum impact resistance while protecting occupants from falling shards of glass.
The shape of the skylights installed in your home will impact the design and look of the room. In the past skylights were prone to vapor build-up during the cold season. This vapor would then trickle down as water droplets into the room. However these days it is possible to buy skylights with channels that collect water vapor. More expensive skylights are less vulnerable to condensation related problems. Material: The kind of material used on skylights at home has a direct impact on their look and efficiency. Glass and plastic are the most popular materials used for glazing the skylights. Plastic skylights are less expensive and do not break easily. However plastic glazing may become discolored over time and may even have scratches. Glass on the other hand is scratch proof and does not fade. But it is more expensive and is usually found in commercial structures.