Skylight / July 12, 2018 / Odo Vaillancour
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.
To reflect an even greater amount of light into the room consider painting the inside of the shaft with gloss or semi-gloss white paint. The glass skylights are far superior to the plastic ones. The best glass skylights are surface-mounted. The flashing curb and lens are all manufactured together. They do not have separate moving parts. This makes them less susceptible to leakage and much quieter when it rains. From fixed skylights to flat glass and domed varieties many homeowners are shocked to discover there are a wide variety of skylights available for your home. Skylights are a great addition if youd like to bring natural light to a room or for creating a feeling of lightness and space.
Your ventilating skylight can be operated by one of three ways: Manual skylight controls - These are opened by your use of an extended rod to manually crank the skylight open. These are designed for ceilings of less than 15 feet. Electronic skylight controls - A simpler model of this type of control is wired to a wall mounted switch which opens and closes the skylight. More complex models are controlled by a special wall console of a wireless remote control. Automatic operating controls - With this type of control integrated heat sensors trigger the skylight to open when the interior heat reaches a preset temperature. Exterior sensors automatically close the unit when they sense moisture.