Skylight / July 11, 2018 / Nicolas Charlebois
However these surfaces scratch easily and can become brittle and discolored. Glass glazing - This is found in the more expensive skylights. It is more durable than plastic and does not discolor. All glass used for skylights must be made of "safety glazing" a generic term for both tempered and laminated glass. Tempered glass is the most impact resistant. Laminated glass is fabricated with a thin layer of plastic embedded near the center of the glass. Both types keep the glass from breaking into large sharp pieces. Skylights are often made with a tempered glass on the exterior side and a laminated pane on the interior side. This arrangement gives maximum impact resistance while protecting occupants from falling shards of glass.
Some people in an effort to let in plenty of light choose the biggest skylight they can afford. But bigger is not always better when it comes to choosing skylights for your home. The size of the skylight should not be more than 5% of the floor space if there are other windows in the room. It should be less than 15% of the floor space if there are few windows in the room. Unlike commercial buildings where structures are huge there is only so much that a room within the house can take. So choose skylights that suit the size of the room. Style: Although most skylights are rectangular these are available in a variety of sizes shapes and colors.
This heat gain can be minimized by installing your south-facing skylight in the shade of deciduous trees or adding a moving window covering. Skylights come in all shapes and sizes. Its size greatly affects the illumination level and temperature of the space below. As a rule of thumb the size of a skylight should never be more than 5% of the floor area in rooms with many windows; and no more than 15% of the rooms total floor area for spaces with few windows. Dept. of Energy. Glazing Like windows skylight manufacturers use different types of glazing to improve their energy efficiency. The glazing comes in three different forms. Plastic glazing - This type of glazing is usually inexpensive and less likely to break than other glazing materials.