Skylight / November 14, 2018 / Onfroi Berger.
This means more heat is going to find its way into the room at the most inopportune times of the day. The problem can be rectified by careful selection of skylights. Skylights in the home are the easiest least expensive and most effective way of sprucing up your home and giving it a makeover. The reason why skylights are becoming immensely popular is the way they encompass a slice of the sky within the home. They can thus impart roominess to any room. But to get maximum impact from skylights in the home it is important to understand the design positioning and size of skylights. Size: As a rule specialists believe that skylights illuminate a room that is roughly 20 times the size of the room.
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.
The shape of the skylights installed in your home will impact the design and look of the room. In the past skylights were prone to vapor build-up during the cold season. This vapor would then trickle down as water droplets into the room. However these days it is possible to buy skylights with channels that collect water vapor. More expensive skylights are less vulnerable to condensation related problems. Material: The kind of material used on skylights at home has a direct impact on their look and efficiency. Glass and plastic are the most popular materials used for glazing the skylights. Plastic skylights are less expensive and do not break easily. However plastic glazing may become discolored over time and may even have scratches. Glass on the other hand is scratch proof and does not fade. But it is more expensive and is usually found in commercial structures.
Since most skylights are meant to be installed on a roof with asphalt shingles you may need to pay extra for flashing if you have tile or metal roofing. When you think of skylight design you may think that only refers to the visible shape of the panel chosen; in fact there are many aspects to skylights that relate to the design and affect the usefulness of the skylight. Some skylights need to provide light for a large area while others have a different purpose. Learn all you can about skylights and skylight design as a consumer before you consult a professional. This will help you to understand better the decisions you will have to make. Skylights are beneficial to have in your home for many reasons.