Skylight / July 8, 2018 / Baptiste Allain
Typically flat glass skylights include all the installation materials and they are among the easiest to install. Moreover because they are glass these flat skylights are less likely to scratch. Domed acrylic skylights are among the most affordable especially compared to glass alternatives. These skylights are available in a variety of tints making them an attractive addition to any home or room. Unfortunately domed acrylic skylights do not offer the same noise protection as glass varieties and they tend to be more susceptible to leaking. Function Now that you know a little bit about the types of skylights available you should take some time to consider their function.
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.
This is ideal for cubicles or small offices even restrooms. The places where tubular skylights are most effective are in the bottom floor of a multi-story building in order to light the space with natural sunlight warehouses private offices or to prevent heat loss and for solar gain. The installation of tubular skylights requires a professional installer who can work with the thickness of your ceiling and angles to get the most out of your skylight. The top panel of the skylight will be affixed to your roof with the channel running through the ceiling completely hidden from sight with the bottom window attached on the visible area of the ceiling.