Skylight / July 11, 2018 / Nicolas Charlebois
A skylight is like a window which has been placed in your roof. It has a frame specially designed to withstand rain and prevent leakage from rain and snow. To maximize a skylights use of natural light to illuminate a room or its passive solar heating potential you will want to take into consideration how a skylight is positioned. Facing north your skylight will provide fairly constant illumination but will not provide a lot of heat. Facing east it will provide the maximum amount of light and solar heat gain in the morning. Facing west your skylight provides afternoon sunlight as well as heat gain. A skylight facing south provides the greatest potential for winter passive solar heat gain than any other location but will often allow unwanted heat gain in the summer.
Solar heat control glazing - Manufacturers use various glazing methods to reduce the impact of summer time solar heat gains and winter time heat losses. These come in the form of heat-absorbing tints double and tripled paned skylights and low-emissivity coatings. Slope When your window professional installs your skylight one of the factors they will take into consideration is the slope. The slope or tilt of the skylight affects the amount of solar heat gain. A low slope on your skylight admits more solar heat in the summer and less in the winter which is the opposite of the effect you are trying to achieve As a rule of thumb you want to achieve a slope equal to your geographical latitude plus 5 to 15 degrees.
This heat gain can be minimized by installing your south-facing skylight in the shade of deciduous trees or adding a moving window covering. Skylights come in all shapes and sizes. Its size greatly affects the illumination level and temperature of the space below. As a rule of thumb the size of a skylight should never be more than 5% of the floor area in rooms with many windows; and no more than 15% of the rooms total floor area for spaces with few windows. Dept. of Energy. Glazing Like windows skylight manufacturers use different types of glazing to improve their energy efficiency. The glazing comes in three different forms. Plastic glazing - This type of glazing is usually inexpensive and less likely to break than other glazing materials.