Skylight / November 15, 2018 / Odo Vaillancour.
For instance flat roofs are more susceptible to drainage problems. Flat skylights on flat roofs may lead to water pooling. That is why experts recommend the use of domed skylights on flat roofs. This promotes drainage. Skylights for low pitch installation generally have significant slope built into the design. Attention must be paid to such things before installing skylights. Skylights are introduced into the design and architecture of the home to bring in lots of light heat and warmth. But what happens if there is a tall tree towering over the skylight on the roof? The very purpose of the skylight is defeated. The position of the skylight on the roof plays a vital role in determining its usefulness and effectiveness.
The shape of the skylights installed in your home will impact the design and look of the room. In the past skylights were prone to vapor build-up during the cold season. This vapor would then trickle down as water droplets into the room. However these days it is possible to buy skylights with channels that collect water vapor. More expensive skylights are less vulnerable to condensation related problems. Material: The kind of material used on skylights at home has a direct impact on their look and efficiency. Glass and plastic are the most popular materials used for glazing the skylights. Plastic skylights are less expensive and do not break easily. However plastic glazing may become discolored over time and may even have scratches. Glass on the other hand is scratch proof and does not fade. But it is more expensive and is usually found in commercial structures.
It is recommended that the skylight size should never be more than five percent of the floor area in rooms with many windows and not more than fifteen percent of the rooms total floor area for spaces with very few windows. Skylights on north-facing roofs provide cool illumination while east-facing roofs provide maximum light and heat in the morning. West-facing skylights provide afternoon sunlight and heat. South-facing skylights provide more passive solar heat than any other location. Skylights are an excellent way to bring more natural light into your home. Just one skylight can dramatically transform your room by adding 30% more natural light than a window. This helps you save energy and makes your home warmer during the winter.
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.