Skylight / November 15, 2018 / Odo Vaillancour.
Your ventilating skylight can be operated by one of three ways: Manual skylight controls - These are opened by your use of an extended rod to manually crank the skylight open. These are designed for ceilings of less than 15 feet. Electronic skylight controls - A simpler model of this type of control is wired to a wall mounted switch which opens and closes the skylight. More complex models are controlled by a special wall console of a wireless remote control. Automatic operating controls - With this type of control integrated heat sensors trigger the skylight to open when the interior heat reaches a preset temperature. Exterior sensors automatically close the unit when they sense moisture.
Glass and acrylic or plastic skylights are available. Tubular skylights are relatively new on the scene. The small size allows them it to be used in spaces where full-sized skylights cannot. Hallways bathrooms even closets can accommodate a tubular skylight. They provide a lot of light in spite of their small size. The concept and installation process are basically the same as for a regular skylight except they have an enclosed tunnel of reflective material to reflect the light. They are available in many sizes. The small ones are 10 to 12 inch diameter and the large ones are 24 inches. Flat glass skylights come mounted in a wood or integrated rubber and metal framework and require no additional curb construction.
Obviously skylights provide added day lighting and they may even offer ventilation. However heat gain and loss is also a consideration you should make. Many modern skylights feature sun tracking lenses or mirrored surfaces that provide light without heat loss or gain. Moreover whether a fixed skylight or similar alternative is better than a ventilated skylight is a question youll want to answer. Remember ventilating can help with temperature control but it is also important for preventing the buildup of moisture. Take some time to speak to your skylight or roofing professional so that you can be sure to choose the right skylight.
If the room you intend to illuminate with the skylight has an open ceiling with no attic space above you can install the skylight without needing to construct a light shaft. This is by far the simplest installation and it offers the maximum amount of light and a view of the sky. For ceilings with an attic space above a light shaft must be constructed that connects the skylight to the room. Skylight shafts take one of three forms: Straight in which the shaft drops vertically from the roof to the ceiling and is the same dimension as the skylight itself. This type is the easiest to construct but because of its offset angle relative to the skylight offers the least amount of light.