Skylight / July 11, 2018 / Nicolas Charlebois
This heat gain can be minimized by installing your south-facing skylight in the shade of deciduous trees or adding a moving window covering. Skylights come in all shapes and sizes. Its size greatly affects the illumination level and temperature of the space below. As a rule of thumb the size of a skylight should never be more than 5% of the floor area in rooms with many windows; and no more than 15% of the rooms total floor area for spaces with few windows. Dept. of Energy. Glazing Like windows skylight manufacturers use different types of glazing to improve their energy efficiency. The glazing comes in three different forms. Plastic glazing - This type of glazing is usually inexpensive and less likely to break than other glazing materials.
Fixed skylights are among the most popular and they come in a wide variety of shapes. Ventilated skylights can be opened and closed to allow the passage of air. These make a great addition to bathrooms and kitchens and they can be controlled by temperature sensor remote control wall switch and manual or motorized cranks. Tubular skylights are among the newest styles. They are popular because they are small and can be used where full-sized skylights will not fit. They allow for the passage of light and theyre installed the same way as regular skylights. Flat glass skylights are built into a framework (usually made of wood rubber or metal) and can be placed directly into a cut hole in your roof.
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.