Skylight / July 11, 2018 / Nicolas Charlebois
If the room you intend to illuminate with the skylight has an open ceiling with no attic space above you can install the skylight without needing to construct a light shaft. This is by far the simplest installation and it offers the maximum amount of light and a view of the sky. For ceilings with an attic space above a light shaft must be constructed that connects the skylight to the room. Skylight shafts take one of three forms: Straight in which the shaft drops vertically from the roof to the ceiling and is the same dimension as the skylight itself. This type is the easiest to construct but because of its offset angle relative to the skylight offers the least amount of light.
Skylights are best suited to catch sunlight from the overhanging clouds. In addition to this skylight windows allow a deeper penetration of the suns light into the structure of the house in such a way that it is less obtrusive. Skylights also keep heating and cooling costs down. Skylights are your windows to the heaven. They can breathe drama into any living space. And they are all the rage these days. In such a scenario it is easy for people to forget important considerations while choosing skylights. Energy problems that influence windows operate just as strongly or even more so in skylights. For instance heat loss heat gains solar gains ventilation and water pooling affect skylight windows too.
Fixed skylights are among the most popular and they come in a wide variety of shapes. Ventilated skylights can be opened and closed to allow the passage of air. These make a great addition to bathrooms and kitchens and they can be controlled by temperature sensor remote control wall switch and manual or motorized cranks. Tubular skylights are among the newest styles. They are popular because they are small and can be used where full-sized skylights will not fit. They allow for the passage of light and theyre installed the same way as regular skylights. Flat glass skylights are built into a framework (usually made of wood rubber or metal) and can be placed directly into a cut hole in your roof.