Skylight / July 12, 2018 / Odo Vaillancour
Tubular skylights An alternative to the conventional skylight which looks like a window in your roof is the tubular skylight. The tubular skylight is a roof-mounted dome which collects natural light and delivers it to the room below. It is less expensive than the conventional skylight because it is designed to fit between roof and ceiling framing eliminating the need for structural modifications. You will commonly see these used in bathrooms hallways and closets but they can be used in any room of your house. The average tubular skylight ranges in size from 10 - 21 inches in diameter which lights a 100-600 square foot interior space.
Another modern option is to have a replacement skylight with double panes of glass with a layer of argon gas infused in between the panes. New features and options make getting a replacement skylight a more viable option than just shingling over the old one. Remote controls make it possible to open and close a skylight on a whim rather than having to clamber about on ladders. Some skylights can also come with rain sensors so they will close the moment they feel raindrops or too much moisture. These options allow the skylight to vent the house while also protecting it against damage.
Angled where the shaft is parallel to the pitch of the skylight. It too is the same dimension as the skylight but its straight-in angle offers more light than a straight shaft. Angled shafts also are used to connect two locations that cannot otherwise be aligned. This occurs when the skylight must be installed in a particular spot - between two trusses for example - and the shaft opening is likewise limited to a particular location on the ceiling that is not directly under the skylight. Splayed or pyramid in which the ceiling opening is larger than the skylight opening in width length or both. This type although a little harder to construct is the most popular simply because it allows a smaller skylight to illuminate a larger area.