Skylight / July 12, 2018 / Odo Vaillancour
The structure of the house is another deciding factor. If there are beams pillars or pipes in the way the skylight on the roof may not get the right amount of visibility. Making structural changes is not an affordable option in most cases. So it is better to evaluate the room before you place skylights on the roof. In most cases skylights should be built into the house at the time of drawing the design of the house. In case skylights are introduced at a later point of time care must be taken to ensure that they are placed correctly and installed properly. Skylights are overhead windows often in a roof that allow sunlight to filter inside any enclosed area; they are a great natural light option to artificial lighting solutions during the daytime.
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.
If installed badly however they can do a great deal of damage. Many people dont realize how easily that damage can be avoided by purchasing a replacement skylight instead of giving it up altogether. A skylight might be detrimental to a house in many different ways. They require flashing when installed and without proper flashing of aluminum or some other sturdy material the light will leak. Rain and other forms of moist weather will find its way into the house itself. Roof design is very important when choosing and installing a skylight. It is another reason why skylights fail after awhile. The angle or tilt of a roof and the angle at which the skylight is set will determine how strong and supported the light is.