Skylight / July 8, 2018 / Baptiste Allain
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.
Your ventilating skylight can be operated by one of three ways: Manual skylight controls - These are opened by your use of an extended rod to manually crank the skylight open. These are designed for ceilings of less than 15 feet. Electronic skylight controls - A simpler model of this type of control is wired to a wall mounted switch which opens and closes the skylight. More complex models are controlled by a special wall console of a wireless remote control. Automatic operating controls - With this type of control integrated heat sensors trigger the skylight to open when the interior heat reaches a preset temperature. Exterior sensors automatically close the unit when they sense moisture.
Skylights let in outdoor light cutting down on both heating and electricity costs. When a skylight is designed and installed properly it can light an entire room provide heat and improve the appearance of your home or business. These are just some of the basic benefits to using skylights; you could even look into utilizing the solar power from your skylights in different ways to live more eco-friendly. No matter what type of home or business ceiling thickness you have there is a skylight design that will work for you. For buildings with thick ceilings attics or multi-storied buildings often utilize tubular skylights. For the layperson the easiest way to describe tubular skylight design is a long tubular channel with a collector at the top and a diffuser at the bottom that will illuminate an area between 75 and 150 square feet per skylight.