Skylight / July 10, 2018 / Faye Savoie
Your ventilating skylight can be operated by one of three ways: Manual skylight controls - These are opened by your use of an extended rod to manually crank the skylight open. These are designed for ceilings of less than 15 feet. Electronic skylight controls - A simpler model of this type of control is wired to a wall mounted switch which opens and closes the skylight. More complex models are controlled by a special wall console of a wireless remote control. Automatic operating controls - With this type of control integrated heat sensors trigger the skylight to open when the interior heat reaches a preset temperature. Exterior sensors automatically close the unit when they sense moisture.
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.
It will also make all the difference for a skylight that doesnt have newer methods for moving condensation away from the window. It is possible that some skylights are suffering manufacturer related defects. Most worthy manufacturers of skylights or replacements will guarantee their product. A new and complete skylight will be sent and installed hopefully at no cost. It will require the same installation techniques as applied with the first but will obviously be better all around. It is often only when installing a replacement skylight that the damage caused by the original is noticed. The moisture damage caused to a roof is often hidden by the shingles and failed flashing around a skylight.