Skylight / July 11, 2018 / Nicolas Charlebois
If installed badly however they can do a great deal of damage. Many people dont realize how easily that damage can be avoided by purchasing a replacement skylight instead of giving it up altogether. A skylight might be detrimental to a house in many different ways. They require flashing when installed and without proper flashing of aluminum or some other sturdy material the light will leak. Rain and other forms of moist weather will find its way into the house itself. Roof design is very important when choosing and installing a skylight. It is another reason why skylights fail after awhile. The angle or tilt of a roof and the angle at which the skylight is set will determine how strong and supported the light is.
Typically flat glass skylights include all the installation materials and they are among the easiest to install. Moreover because they are glass these flat skylights are less likely to scratch. Domed acrylic skylights are among the most affordable especially compared to glass alternatives. These skylights are available in a variety of tints making them an attractive addition to any home or room. Unfortunately domed acrylic skylights do not offer the same noise protection as glass varieties and they tend to be more susceptible to leaking. Function Now that you know a little bit about the types of skylights available you should take some time to consider their function.
However these surfaces scratch easily and can become brittle and discolored. Glass glazing - This is found in the more expensive skylights. It is more durable than plastic and does not discolor. All glass used for skylights must be made of "safety glazing" a generic term for both tempered and laminated glass. Tempered glass is the most impact resistant. Laminated glass is fabricated with a thin layer of plastic embedded near the center of the glass. Both types keep the glass from breaking into large sharp pieces. Skylights are often made with a tempered glass on the exterior side and a laminated pane on the interior side. This arrangement gives maximum impact resistance while protecting occupants from falling shards of glass.