Skylight / July 11, 2018 / Nicolas Charlebois
To reflect an even greater amount of light into the room consider painting the inside of the shaft with gloss or semi-gloss white paint. The glass skylights are far superior to the plastic ones. The best glass skylights are surface-mounted. The flashing curb and lens are all manufactured together. They do not have separate moving parts. This makes them less susceptible to leakage and much quieter when it rains. From fixed skylights to flat glass and domed varieties many homeowners are shocked to discover there are a wide variety of skylights available for your home. Skylights are a great addition if youd like to bring natural light to a room or for creating a feeling of lightness and space.
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.
Your ventilating skylight can be operated by one of three ways: Manual skylight controls - These are opened by your use of an extended rod to manually crank the skylight open. These are designed for ceilings of less than 15 feet. Electronic skylight controls - A simpler model of this type of control is wired to a wall mounted switch which opens and closes the skylight. More complex models are controlled by a special wall console of a wireless remote control. Automatic operating controls - With this type of control integrated heat sensors trigger the skylight to open when the interior heat reaches a preset temperature. Exterior sensors automatically close the unit when they sense moisture.