Skylight / July 11, 2018 / Nicolas Charlebois
Skylights let natural light stream into your home bringing warmth and a feeling of spaciousness. When properly selected and used they can reduce your need for electric lighting and minimize your heating and cooling costs. There are also health benefits to this wonderful sunlight that shines on us. If you lack sufficient sunlight on your skin you will suffer health effects. Thats because the human body was designed to be exposed to sunlight on a frequent basis. We evolved after all under the natural sun not under fluorescent lighting. Our environment was one with plentiful sunlight. Skylights can provide up to 30% more natural light than vertical windows while making a small space seem bigger.
However these surfaces scratch easily and can become brittle and discolored. Glass glazing - This is found in the more expensive skylights. It is more durable than plastic and does not discolor. All glass used for skylights must be made of "safety glazing" a generic term for both tempered and laminated glass. Tempered glass is the most impact resistant. Laminated glass is fabricated with a thin layer of plastic embedded near the center of the glass. Both types keep the glass from breaking into large sharp pieces. Skylights are often made with a tempered glass on the exterior side and a laminated pane on the interior side. This arrangement gives maximum impact resistance while protecting occupants from falling shards of glass.
Your ventilating skylight can be operated by one of three ways: Manual skylight controls - These are opened by your use of an extended rod to manually crank the skylight open. These are designed for ceilings of less than 15 feet. Electronic skylight controls - A simpler model of this type of control is wired to a wall mounted switch which opens and closes the skylight. More complex models are controlled by a special wall console of a wireless remote control. Automatic operating controls - With this type of control integrated heat sensors trigger the skylight to open when the interior heat reaches a preset temperature. Exterior sensors automatically close the unit when they sense moisture.