Skylight / July 11, 2018 / Nicolas Charlebois
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.
If the room you intend to illuminate with the skylight has an open ceiling with no attic space above you can install the skylight without needing to construct a light shaft. This is by far the simplest installation and it offers the maximum amount of light and a view of the sky. For ceilings with an attic space above a light shaft must be constructed that connects the skylight to the room. Skylight shafts take one of three forms: Straight in which the shaft drops vertically from the roof to the ceiling and is the same dimension as the skylight itself. This type is the easiest to construct but because of its offset angle relative to the skylight offers the least amount of light.
This heat gain can be minimized by installing your south-facing skylight in the shade of deciduous trees or adding a moving window covering. Skylights come in all shapes and sizes. Its size greatly affects the illumination level and temperature of the space below. As a rule of thumb the size of a skylight should never be more than 5% of the floor area in rooms with many windows; and no more than 15% of the rooms total floor area for spaces with few windows. Dept. of Energy. Glazing Like windows skylight manufacturers use different types of glazing to improve their energy efficiency. The glazing comes in three different forms. Plastic glazing - This type of glazing is usually inexpensive and less likely to break than other glazing materials.