Skylight / July 11, 2018 / Nicolas Charlebois
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.
A skylight might seem like the easiest option for rooms that are cramped dingy and dark. In many cases it is but only if the right kind of skylight is combined with the right type of roof. Fixing a skylight on the roof is not like placing a window in the wall. Most of us think only of the interior when we fix skylights. But did you know that your first priority should be your roof followed by the positioning of the skylight on the roof? The shape of the roof is a vital to the selection of skylights. There are different skylights for sloped roofs and different skylights for flat roofs. Incorrect installation can lead to problems in the future.
If installed badly however they can do a great deal of damage. Many people dont realize how easily that damage can be avoided by purchasing a replacement skylight instead of giving it up altogether. A skylight might be detrimental to a house in many different ways. They require flashing when installed and without proper flashing of aluminum or some other sturdy material the light will leak. Rain and other forms of moist weather will find its way into the house itself. Roof design is very important when choosing and installing a skylight. It is another reason why skylights fail after awhile. The angle or tilt of a roof and the angle at which the skylight is set will determine how strong and supported the light is.