Skylight / November 11, 2018 / Baptiste Allain.
For instance flat roofs are more susceptible to drainage problems. Flat skylights on flat roofs may lead to water pooling. That is why experts recommend the use of domed skylights on flat roofs. This promotes drainage. Skylights for low pitch installation generally have significant slope built into the design. Attention must be paid to such things before installing skylights. Skylights are introduced into the design and architecture of the home to bring in lots of light heat and warmth. But what happens if there is a tall tree towering over the skylight on the roof? The very purpose of the skylight is defeated. The position of the skylight on the roof plays a vital role in determining its usefulness and effectiveness.
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.
The shape of the skylights installed in your home will impact the design and look of the room. In the past skylights were prone to vapor build-up during the cold season. This vapor would then trickle down as water droplets into the room. However these days it is possible to buy skylights with channels that collect water vapor. More expensive skylights are less vulnerable to condensation related problems. Material: The kind of material used on skylights at home has a direct impact on their look and efficiency. Glass and plastic are the most popular materials used for glazing the skylights. Plastic skylights are less expensive and do not break easily. However plastic glazing may become discolored over time and may even have scratches. Glass on the other hand is scratch proof and does not fade. But it is more expensive and is usually found in commercial structures.
If the room you intend to illuminate with the skylight has an open ceiling with no attic space above you can install the skylight without needing to construct a light shaft. This is by far the simplest installation and it offers the maximum amount of light and a view of the sky. For ceilings with an attic space above a light shaft must be constructed that connects the skylight to the room. Skylight shafts take one of three forms: Straight in which the shaft drops vertically from the roof to the ceiling and is the same dimension as the skylight itself. This type is the easiest to construct but because of its offset angle relative to the skylight offers the least amount of light.