Skylight / July 11, 2018 / Nicolas Charlebois
The shape of the skylights installed in your home will impact the design and look of the room. In the past skylights were prone to vapor build-up during the cold season. This vapor would then trickle down as water droplets into the room. However these days it is possible to buy skylights with channels that collect water vapor. More expensive skylights are less vulnerable to condensation related problems. Material: The kind of material used on skylights at home has a direct impact on their look and efficiency. Glass and plastic are the most popular materials used for glazing the skylights. Plastic skylights are less expensive and do not break easily. However plastic glazing may become discolored over time and may even have scratches. Glass on the other hand is scratch proof and does not fade. But it is more expensive and is usually found in commercial structures.
For example the optimum slope for a south-facing skylight in Columbus Ohio at 40º North latitude is 45º to 55º. Every skylight has a "shaft" which governs how much light is admitted into the room below. If all four sides are flared then the light is spread over a wide area. If your skylight has a shaft with perpendicular sides the light is focused straight below. If your skylights shaft is flared on only one or two sides then the light is sprayed in the flared direction. Ventilation If you wish you can have a skylight which also provides ventilation as well as light to your room. This allows you to release the hot air which collects at your ceiling.
Skylights let in outdoor light cutting down on both heating and electricity costs. When a skylight is designed and installed properly it can light an entire room provide heat and improve the appearance of your home or business. These are just some of the basic benefits to using skylights; you could even look into utilizing the solar power from your skylights in different ways to live more eco-friendly. No matter what type of home or business ceiling thickness you have there is a skylight design that will work for you. For buildings with thick ceilings attics or multi-storied buildings often utilize tubular skylights. For the layperson the easiest way to describe tubular skylight design is a long tubular channel with a collector at the top and a diffuser at the bottom that will illuminate an area between 75 and 150 square feet per skylight.