Skylight / July 11, 2018 / Nicolas Charlebois
Skylights let in outdoor light cutting down on both heating and electricity costs. When a skylight is designed and installed properly it can light an entire room provide heat and improve the appearance of your home or business. These are just some of the basic benefits to using skylights; you could even look into utilizing the solar power from your skylights in different ways to live more eco-friendly. No matter what type of home or business ceiling thickness you have there is a skylight design that will work for you. For buildings with thick ceilings attics or multi-storied buildings often utilize tubular skylights. For the layperson the easiest way to describe tubular skylight design is a long tubular channel with a collector at the top and a diffuser at the bottom that will illuminate an area between 75 and 150 square feet per skylight.
To make sure that glass skylights are protected these are made of tempered glass on the outside and have a laminated pane on the inside. Position: Where and how you place skylights within the home is equally important. Location plays a vital role in natural lighting and solar heating. When they are placed on the roof and facing the north you can expect consistent but cool lighting. Skylights that face the east provide maximum solar energy in the mornings while those facing the west will give maximum afternoon sunlight. If heat is a problem you may install skylights in the shade of a tree or have a shading device on top of the skylight. The slope at which skylights are placed also controls the amount of heat and light received. Before buying skylights for the home do a little research. Prices tend to vary from a few hundred to a few thousand dollars. Price climbs with the addition of features like shading devices remote control and special glazing.
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.