Skylight / July 16, 2018 / Baptiste Allain
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.
This is ideal for cubicles or small offices even restrooms. The places where tubular skylights are most effective are in the bottom floor of a multi-story building in order to light the space with natural sunlight warehouses private offices or to prevent heat loss and for solar gain. The installation of tubular skylights requires a professional installer who can work with the thickness of your ceiling and angles to get the most out of your skylight. The top panel of the skylight will be affixed to your roof with the channel running through the ceiling completely hidden from sight with the bottom window attached on the visible area of the ceiling.
A skylight might seem like the easiest option for rooms that are cramped dingy and dark. In many cases it is but only if the right kind of skylight is combined with the right type of roof. Fixing a skylight on the roof is not like placing a window in the wall. Most of us think only of the interior when we fix skylights. But did you know that your first priority should be your roof followed by the positioning of the skylight on the roof? The shape of the roof is a vital to the selection of skylights. There are different skylights for sloped roofs and different skylights for flat roofs. Incorrect installation can lead to problems in the future.