Skylight / November 16, 2018 / Nicolas Charlebois.
This means more heat is going to find its way into the room at the most inopportune times of the day. The problem can be rectified by careful selection of skylights. Skylights in the home are the easiest least expensive and most effective way of sprucing up your home and giving it a makeover. The reason why skylights are becoming immensely popular is the way they encompass a slice of the sky within the home. They can thus impart roominess to any room. But to get maximum impact from skylights in the home it is important to understand the design positioning and size of skylights. Size: As a rule specialists believe that skylights illuminate a room that is roughly 20 times the size of the room.
Another modern option is to have a replacement skylight with double panes of glass with a layer of argon gas infused in between the panes. New features and options make getting a replacement skylight a more viable option than just shingling over the old one. Remote controls make it possible to open and close a skylight on a whim rather than having to clamber about on ladders. Some skylights can also come with rain sensors so they will close the moment they feel raindrops or too much moisture. These options allow the skylight to vent the house while also protecting it against damage.
For example the optimum slope for a south-facing skylight in Columbus Ohio at 40º North latitude is 45º to 55º. Every skylight has a "shaft" which governs how much light is admitted into the room below. If all four sides are flared then the light is spread over a wide area. If your skylight has a shaft with perpendicular sides the light is focused straight below. If your skylights shaft is flared on only one or two sides then the light is sprayed in the flared direction. Ventilation If you wish you can have a skylight which also provides ventilation as well as light to your room. This allows you to release the hot air which collects at your ceiling.
However these surfaces scratch easily and can become brittle and discolored. Glass glazing - This is found in the more expensive skylights. It is more durable than plastic and does not discolor. All glass used for skylights must be made of "safety glazing" a generic term for both tempered and laminated glass. Tempered glass is the most impact resistant. Laminated glass is fabricated with a thin layer of plastic embedded near the center of the glass. Both types keep the glass from breaking into large sharp pieces. Skylights are often made with a tempered glass on the exterior side and a laminated pane on the interior side. This arrangement gives maximum impact resistance while protecting occupants from falling shards of glass.