Skylight / July 9, 2018 / Delphine Demers
However these surfaces scratch easily and can become brittle and discolored. Glass glazing - This is found in the more expensive skylights. It is more durable than plastic and does not discolor. All glass used for skylights must be made of "safety glazing" a generic term for both tempered and laminated glass. Tempered glass is the most impact resistant. Laminated glass is fabricated with a thin layer of plastic embedded near the center of the glass. Both types keep the glass from breaking into large sharp pieces. Skylights are often made with a tempered glass on the exterior side and a laminated pane on the interior side. This arrangement gives maximum impact resistance while protecting occupants from falling shards of glass.
The air near the ceiling is automatically cooled when fresh air flows in from outside. These roof skylights are so designed that they open and close a little to let in the fresh air. The glass tilts at about 45 degrees. There is a small handle to manually open the venting roof skylight. You crank the handle slightly to open or close or adjust the angle and position of the glass. The venting roof skylights are located in the ceiling of the house and are hard to reach so there is an extension to the handle. Otherwise every time you want to open or shut the venting roof skylight you will need a ladder or a high stool. Nowadays electronically operated venting skylights are also becoming very popular.
Your ventilating skylight can be operated by one of three ways: Manual skylight controls - These are opened by your use of an extended rod to manually crank the skylight open. These are designed for ceilings of less than 15 feet. Electronic skylight controls - A simpler model of this type of control is wired to a wall mounted switch which opens and closes the skylight. More complex models are controlled by a special wall console of a wireless remote control. Automatic operating controls - With this type of control integrated heat sensors trigger the skylight to open when the interior heat reaches a preset temperature. Exterior sensors automatically close the unit when they sense moisture.