Skylight / July 15, 2018 / Arnou Gabriaux
There must be a clear opening in the area where the skylight is to be placed. A skylight that faces the East lets in plenty of morning sunshine while one that faces the West brings lets in the afternoon sunshine. It is important to know the amount of light and the type of light your skylight lets in. Afternoon sunlight can become uncomfortably hot if you live in a warm and dry place. The size of the room also has a bearing on the effectiveness of the skylight on your roof. If the room is small your choices are severely limited as skylights are best suited for large rooms. If you still want a skylight for a small room it is best to opt for an elegant pyramid skylight. This gives the illusion of space.
The air near the ceiling is automatically cooled when fresh air flows in from outside. These roof skylights are so designed that they open and close a little to let in the fresh air. The glass tilts at about 45 degrees. There is a small handle to manually open the venting roof skylight. You crank the handle slightly to open or close or adjust the angle and position of the glass. The venting roof skylights are located in the ceiling of the house and are hard to reach so there is an extension to the handle. Otherwise every time you want to open or shut the venting roof skylight you will need a ladder or a high stool. Nowadays electronically operated venting skylights are also becoming very popular.
Your ventilating skylight can be operated by one of three ways: Manual skylight controls - These are opened by your use of an extended rod to manually crank the skylight open. These are designed for ceilings of less than 15 feet. Electronic skylight controls - A simpler model of this type of control is wired to a wall mounted switch which opens and closes the skylight. More complex models are controlled by a special wall console of a wireless remote control. Automatic operating controls - With this type of control integrated heat sensors trigger the skylight to open when the interior heat reaches a preset temperature. Exterior sensors automatically close the unit when they sense moisture.