Skylight / July 16, 2018 / Baptiste Allain
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.
Skylights may seem inexpensive at first glance since a quality 2x4 foot skylight along with a flashing kit costs anywhere from $100 to $400. However you need to consider adding another $3000 for installation costs. That being said you first need to carefully evaluate if installing a skylight is the right thing for your home. Till recently having a roof slope determined if you could install a skylight. Flat roofs or those which were too steep required special tools and techniques. However many of the skylight kits available today include a comprehensive installation kit and procedures which permits it to be installed on all types of roofs.
This heat gain can be minimized by installing your south-facing skylight in the shade of deciduous trees or adding a moving window covering. Skylights come in all shapes and sizes. Its size greatly affects the illumination level and temperature of the space below. As a rule of thumb the size of a skylight should never be more than 5% of the floor area in rooms with many windows; and no more than 15% of the rooms total floor area for spaces with few windows. Dept. of Energy. Glazing Like windows skylight manufacturers use different types of glazing to improve their energy efficiency. The glazing comes in three different forms. Plastic glazing - This type of glazing is usually inexpensive and less likely to break than other glazing materials.