Skylight / July 16, 2018 / Delphine Demers
Before installing a skylight in your home you need to carefully evaluate what type of skylight will work best for you considering your specific requirements and how to install it in a way that it improves your homes energy efficiency. Its a sensible idea to evaluate the energy performance ratings of skylights based on the climate that you live in and the architectural design of your home. In the U.S. you can find labeled energy-efficient skylights which tell you the minimum energy performance rating criteria by climate. The physical dimensions of the skylight also greatly affect the lux level and temperature of the space it is being used for.
Angled where the shaft is parallel to the pitch of the skylight. It too is the same dimension as the skylight but its straight-in angle offers more light than a straight shaft. Angled shafts also are used to connect two locations that cannot otherwise be aligned. This occurs when the skylight must be installed in a particular spot - between two trusses for example - and the shaft opening is likewise limited to a particular location on the ceiling that is not directly under the skylight. Splayed or pyramid in which the ceiling opening is larger than the skylight opening in width length or both. This type although a little harder to construct is the most popular simply because it allows a smaller skylight to illuminate a larger area.
Solar heat control glazing - Manufacturers use various glazing methods to reduce the impact of summer time solar heat gains and winter time heat losses. These come in the form of heat-absorbing tints double and tripled paned skylights and low-emissivity coatings. Slope When your window professional installs your skylight one of the factors they will take into consideration is the slope. The slope or tilt of the skylight affects the amount of solar heat gain. A low slope on your skylight admits more solar heat in the summer and less in the winter which is the opposite of the effect you are trying to achieve As a rule of thumb you want to achieve a slope equal to your geographical latitude plus 5 to 15 degrees.