Skylight / July 7, 2018 / Arnou Gabriaux
Since most skylights are meant to be installed on a roof with asphalt shingles you may need to pay extra for flashing if you have tile or metal roofing. When you think of skylight design you may think that only refers to the visible shape of the panel chosen; in fact there are many aspects to skylights that relate to the design and affect the usefulness of the skylight. Some skylights need to provide light for a large area while others have a different purpose. Learn all you can about skylights and skylight design as a consumer before you consult a professional. This will help you to understand better the decisions you will have to make. Skylights are beneficial to have in your home for many reasons.
For example the optimum slope for a south-facing skylight in Columbus Ohio at 40º North latitude is 45º to 55º. Every skylight has a "shaft" which governs how much light is admitted into the room below. If all four sides are flared then the light is spread over a wide area. If your skylight has a shaft with perpendicular sides the light is focused straight below. If your skylights shaft is flared on only one or two sides then the light is sprayed in the flared direction. Ventilation If you wish you can have a skylight which also provides ventilation as well as light to your room. This allows you to release the hot air which collects at your ceiling.
Tubular skylights An alternative to the conventional skylight which looks like a window in your roof is the tubular skylight. The tubular skylight is a roof-mounted dome which collects natural light and delivers it to the room below. It is less expensive than the conventional skylight because it is designed to fit between roof and ceiling framing eliminating the need for structural modifications. You will commonly see these used in bathrooms hallways and closets but they can be used in any room of your house. The average tubular skylight ranges in size from 10 - 21 inches in diameter which lights a 100-600 square foot interior space.