Skylight / July 16, 2018 / Baptiste Allain
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.
However these surfaces scratch easily and can become brittle and discolored. Glass glazing - This is found in the more expensive skylights. It is more durable than plastic and does not discolor. All glass used for skylights must be made of "safety glazing" a generic term for both tempered and laminated glass. Tempered glass is the most impact resistant. Laminated glass is fabricated with a thin layer of plastic embedded near the center of the glass. Both types keep the glass from breaking into large sharp pieces. Skylights are often made with a tempered glass on the exterior side and a laminated pane on the interior side. This arrangement gives maximum impact resistance while protecting occupants from falling shards of glass.
A skylight might seem like the easiest option for rooms that are cramped dingy and dark. In many cases it is but only if the right kind of skylight is combined with the right type of roof. Fixing a skylight on the roof is not like placing a window in the wall. Most of us think only of the interior when we fix skylights. But did you know that your first priority should be your roof followed by the positioning of the skylight on the roof? The shape of the roof is a vital to the selection of skylights. There are different skylights for sloped roofs and different skylights for flat roofs. Incorrect installation can lead to problems in the future.