Skylight / July 16, 2018 / Baptiste Allain
If the room you intend to illuminate with the skylight has an open ceiling with no attic space above you can install the skylight without needing to construct a light shaft. This is by far the simplest installation and it offers the maximum amount of light and a view of the sky. For ceilings with an attic space above a light shaft must be constructed that connects the skylight to the room. Skylight shafts take one of three forms: Straight in which the shaft drops vertically from the roof to the ceiling and is the same dimension as the skylight itself. This type is the easiest to construct but because of its offset angle relative to the skylight offers the least amount of light.
Tubular skylights An alternative to the conventional skylight which looks like a window in your roof is the tubular skylight. The tubular skylight is a roof-mounted dome which collects natural light and delivers it to the room below. It is less expensive than the conventional skylight because it is designed to fit between roof and ceiling framing eliminating the need for structural modifications. You will commonly see these used in bathrooms hallways and closets but they can be used in any room of your house. The average tubular skylight ranges in size from 10 - 21 inches in diameter which lights a 100-600 square foot interior space.
Skylights may seem inexpensive at first glance since a quality 2x4 foot skylight along with a flashing kit costs anywhere from $100 to $400. However you need to consider adding another $3000 for installation costs. That being said you first need to carefully evaluate if installing a skylight is the right thing for your home. Till recently having a roof slope determined if you could install a skylight. Flat roofs or those which were too steep required special tools and techniques. However many of the skylight kits available today include a comprehensive installation kit and procedures which permits it to be installed on all types of roofs.