Skylight / July 15, 2018 / Arnou Gabriaux
To make sure that glass skylights are protected these are made of tempered glass on the outside and have a laminated pane on the inside. Position: Where and how you place skylights within the home is equally important. Location plays a vital role in natural lighting and solar heating. When they are placed on the roof and facing the north you can expect consistent but cool lighting. Skylights that face the east provide maximum solar energy in the mornings while those facing the west will give maximum afternoon sunlight. If heat is a problem you may install skylights in the shade of a tree or have a shading device on top of the skylight. The slope at which skylights are placed also controls the amount of heat and light received. Before buying skylights for the home do a little research. Prices tend to vary from a few hundred to a few thousand dollars. Price climbs with the addition of features like shading devices remote control and special glazing.
For one thing skylights are positioned in such a way that they are inaccessible unless they are operated by remote. Even in cases of motorized skylights which are easily manipulated there are still some disadvantages that are inherent to skylights that are not present or minimized in windows. Vertical windows lose less heat by convection when compared to skylights. Also since windows are generally protected by overhangs or shrubs they lose less heat by radiation. On the other hand skylights are directly exposed to the sky. Thus they lose more heat by radiation. Proper insulation can reduce this heat loss to a large extent. In the summer season skylights are more exposed to the direct heat of the sun than windows.
However these surfaces scratch easily and can become brittle and discolored. Glass glazing - This is found in the more expensive skylights. It is more durable than plastic and does not discolor. All glass used for skylights must be made of "safety glazing" a generic term for both tempered and laminated glass. Tempered glass is the most impact resistant. Laminated glass is fabricated with a thin layer of plastic embedded near the center of the glass. Both types keep the glass from breaking into large sharp pieces. Skylights are often made with a tempered glass on the exterior side and a laminated pane on the interior side. This arrangement gives maximum impact resistance while protecting occupants from falling shards of glass.